Skip to main content

Posted in Stability Rooms, Stability Chambers-Cabins and Fotostability Chambers-Cabins.

FOTOSTABILITY CABINS

  • - 2 different capacity: 600lt - 1200lt
  • - Temperature range -5°C ... +45°C (Lights Off) / +5°C ... +45°C (Lights On)
  • - Humidity range 35%RH ... 95%RH (Lights Off) / 40%RH ... 80%RH (Lights On)
  • - Touch control
  • - Temparature accurary +/-1 (Lights Off) / +/-2 (Lights On)
  • - Humidity accurary +/-2 (Lights Off) / +/-5 (Lights On)
  • - UV Light 30W/M2 (+/-10% Approx.)
  • - FDA, 21CFR Part 11
  • - IQ, OQ, PQ

Posted in Stability Rooms, Stability Chambers-Cabins and Fotostability Chambers-Cabins.

STABILITY CHAMBERS KBF SERIES

  • - Temperature range: 0 °C to 70 °C
  • - Humidity range: 10 % to 80 % RH
  • - APT.line™ preheating chamber technology
  • - Humidity regulation with capacitive humidity sensor and vapor humidification
  • - Intuitive touchscreen controller with time-segment and real-time programming
  • - Internal data logger, measured values can be read out in open format via USB
  • - Unit self-test for comprehensive status analysis
  • - Tight-sealing inner door made of safety glass (ESG)
  • - Avoidance of glass corrosion by special TIMELESS coating
  • - Inner chamber made of stainless steel
  • - 2 stainless steel racks
  • - Access port with silicone plug, 30 mm, left
  • - 4 stable castors, two with brakes, from 240 liters
  • - Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
  • - Computer interface: Ethernet
  • - Door heating
Models Housing dimensions not incl. fittings and connections W x H x D [mm] Internal dimension W x H x D [mm] Net weight [kg] Interior volume [L]
KBF 115 880 x 1050 x 650 600 x 483 x 351 129 102
KBF 240 925 x 1460 x 800 650 x 785 x 485 184 247
KBF 720 1250 x 1925 x 890 973 x 1250 x 576 309 700
KBF 1020 1250 x 1925 x 1145 976 x 1250 x 836 365 1020

Posted in Stability Rooms, Stability Chambers-Cabins and Fotostability Chambers-Cabins.

DRIVE-IN CHAMBERS

    • Drive-in test chambers for vehicle endurance

      Whitechnic provides drive-in chambers for combined environmental testing to simulate a variety of road conditions and climates. These chambers are designed for full vehicle testing and manufactured to meet your requirements. Drive-In chambers may be constructed using modular/panelized box or fully welded walk-in box depending on your performance specifications.

      Drive-In chambers simulate vibration and a variety of climate conditions including solar simulation or infrared lighting. They may be used to test suspension systems, shocks, squeaks, rattles and more. Every chamber may be tailor-designed to meet various requirements and specifications such as integration with vibration systems for four post road simulation.

      Climate Conditions

      • - Temperature Simulation
      • - Humidity Simulation
      • - Solar Simulation
      • - Vibration Simulation

      Features & Options

      • - Oversize/Additional Doors
      • - Infrared or Solar Lighting
      • - Reinforced Floor
      • - Entry Ramp
      • - Vapor-Proof Lights
      • - Hydro Carbon/Carbon Monoxide Monitor
      • - Explosion Proof Electrical

Posted in Stability Rooms, Stability Chambers-Cabins and Fotostability Chambers-Cabins.

FOTOSTABILITY CHAMBERS KBF P SERIES

    • - Temperature range: 0 °C to 70 °C
    • - Temperature range with light: 10 °C to 60 °C
    • - Humidity range: 10 % to 80 % RH
    • - Positionable illumination cassettes with ICH-compliant UV/Vis light source
    • - APT.line™ preheating chamber technology
    • - Humidity regulation with capacitive humidity sensor and vapor humidification
    • - Inner chamber made of stainless steel
    • - Intuitive touchscreen controller with time-segment and real-time programming
    • - Internal data logger, measured values can be read out in open format via USB
    • - Unit self-test for comprehensive status analysis
    • - Tight-sealing inner door made of safety glass (ESG)
    • - Avoidance of glass corrosion by special TIMELESS coating
    • - Stainless steel racks
    • - Access port with silicone plug, 30 mm, left
    • - 4 stable castors, two with brakes
    • - Class 3.1 independent temperature safety device (DIN 12880) with visual and audible temperature alarm
    • - Computer interface: Ethernet
    • - Door heating
    Models Housing dimensions not incl. fittings and connections W x H x D [mm] Internal dimension W x H x D [mm] Net weight [kg] Interior volume [L]
    KBF P 240 925 x 1460 x 800 650 x 785 x 485 213 247
    KBF P 720 1250 x 1925 x 890 973 x 1250 x 576 374 700

Posted in Stability Rooms, Stability Chambers-Cabins and Fotostability Chambers-Cabins.

WALK-IN STABILITY TEST CHAMBERS

Offers flexibility for testing larger volumes at an economical price

Whitechnic's Modular Walk-In Chambers offers flexibility in designing interior work space with pre-engineered conditioning systems and prefabricated panels that can be assembled to meet virtually any test or size requirement. Whitechnic uses modular conditioning systems which include refrigeration, air circulation, electrical components, optional humidification or dehumidification needed to control your chamber environment. These conditioning systems are designed for easy installation without taking up valuable workspace in your chamber by utilizing removable panels for easy access to all systems. Each conditioning system is tested at the factory to meet your test specifications.

Benefits

  • - Economical to meet the needs of your budget
  • - Easy move-in and assembly
  • - Choice of interior and exterior finishes to meet your laboratory requirements
  • - Configurable to any size to fit your needs

Features

  • - FDA, 21 CFR Part 11 Monitoring System
  • - Mitsubishi PLC systems
  • - Ethernet monitoring & control
  • - RS-232, RS-485 serial communications
  • - Stainless steel interior
  • - Interior lights
  • - An electronic humidity sensor for accuracy